TerraSource Global offers a range of granulators and one-way hammermills.
Granulators by Pennsylvania Crusher Brand
Granulators handle wet, frozen, fine and dirty coals with ease and are used to crush coal in power plants, mines, cement plants, and other applications.
Our Pennsylvania Crusher brand TKK Koal-King Granulator is the most widely used Granulator in the world.
Advantages and benefits include:
- Handles larger feed sizes and higher capacities than many other types of crushers
- Screen Plates are interchangeable to maximise plate life and to reduce inventory requirements
- Slotted openings allow for greater capacities and keep material from building up
- Toothed ring, forged steel hammers have a special profile that crushes most efficiently and allow the unit to operate with less vibration then with cast hammers
- Hammers are arranged for full coverage of the cage, producing far more consistent crushing and more uniform wear of the screen cage
- Bolted frame liners protect the frame during the reduction process
- Hinged rear quadrants swing completely open and expose the entire rotor assembly and much of the crushing chamber
- Clean-out doors make it easy to empty out the Tramp Iron Pocket
- The split design of the bearing housings allows the bearings to be flushed and lubricated easily without removing them from the shaft
- Optional Bypass Chutes are available for customers who have already-to-size coal in their feeds so the pre-sized feed material can be routed around the crushing chamber and returned to the normal discharge area, thus avoiding additional wear to the crusher
- Option of thicker and improved wear materials, as well as liners made from harder steels and
- Hydraulic cage door openers available as an option for easier access
One-Way Hammermills by Pennsylvania Crusher Brand
Triple crushing action makes our one-way Hammermills ideally suited for primary and secondary reduction of limestone, chemicals, coal and many ores.
Pennsylvania Crusher brand one-way hammermills are used for the reduction of a wide range of materials to assorted output sizes in a single pass.
Type DFC Hammermills are used for primary reduction to typical output sizes of 1.5 inches to 5 inches. Type T and Type JRT Hammermills are used for secondary reduction to produce output sizes of 1/4 inch to 1.5 inches.
Advantages and benefits include:
- Employs three distinct and highly effective crushing actions: Impact, Shear and Attrition
- Handles mildly to non-abrasive materials
- Excellent control of topsize
- Uncrushables trapped in tramp iron pocket