As part of Lamons continued commitment to innovation and product line expansion, we are proud to introduce our new line of flange isolation solutions.
Designed to address cathodic protection in a variety of midstream and pipeline applications, the Lamons IsoTek product line will be another solution that allows Lamons to be the most complete provider of flange sealing solutions. This addition represents our commitment technology and innovation.
Designed around the most premium isolation materials, the Lamons IsoTek product line consists of a variety of designs that allow the user to choose a solution appropriate for their application needs.
Lamons IsoMate™
IsoMate sealing/isolating gasket consists of a Phenolic retainer faced on both sides with Nitrile rubber material. This gasket is an economical solution for basic performance.
The IsoMate sealing/isolating gasket is designed for basic applications where electrical flange isolation and corrosion control are required on pipes containing water/wastewater, gas, natural gas, oil and other hydrocarbon-based medias up to 175°F (79°C). Available for flat face and raised face joint flanges from 1⁄2in to 24in, ANSI 150-300#.
Lamons IsoGuard™
The IsoGuard sealing/isolating gasket system is designed for general applications where electrical flange isolation and corrosion control are required on pipes containing gas, natural gas, oil, water/wastewater, and other hydrocarbon based medias up to 300°F (150°C). Available for flat face, raised face and ring type joint flanges from 1⁄2in to 42in, ANSI 150-1500# and API 2-5K.
The IsoGuard™ sealing/isolating gasket system consists of a retainer with an incline-plane seal groove designed to optimize each seal’s elastic memory, in combination with a proven rectangular sealing element ("Quad" ring). This design guarantees low bolt load requirements and sealing reliability.
Lamons Defender™
The Defender sealing and isolating gasket is designed for critical applications. Manufactured with a 316 stainless steel core retainer and laminated on both sides with high-strength G10 laminate, the Defender gasket is resistant to deforming under load and is used when electrical isolation and corrosion control are required on pipes containing gas, natural gas, oil and other hydrocarbon based medias up to 392°F (200°C). Available for flat face, raised face and ring type joint flanges from 1⁄2in to 32in, ANSI 150-2500# and API 2-10K. The Defender gasket is an engineered solution that eliminates costly leaks and provides a solution for fugitive emissions.
IsoTek™ Isolation Kits
For complete isolation, sleeves and washers are needed with an IsoTek sealing and isolation gasket. To isolate connecting flanges and protect the gasket and flange from corrosion, Lamons provides sleeve and washer sets to complete the isolation system. The sleeves and washers prevent current from reaching the bolts/studs and nuts.
Sleeve and washer sets are available in Single and Double washer sets. The Lamons IsoTek product line represents Lamons continued commitment to be the foremost supplier of sealing and fastener technologies. Based on historical requests from our valued customers, Lamons is excited to add these isolation technologies to our current product lineup.
Lamons helpful Sales and Engineering staff is always available to assist in evaluating applications and assisting with product selection and proper usage. For further information on Lamons IsoTek product line, please contact your local sales representative.