Turner Designs Hydrocarbon Instruments are specialists in the measurement and monitoring of oil in water. We are experts in the application of UV fluorescence technology to the monitoring of steam condensate, cooling, and boiler feed water and other oily wastewater. We provide state-of-the-art continuous on-line oil in water monitors as well as bench-top single sample analyzers. Instruments are listed as oil content monitors, oil in water monitors, oil in water analyzers, trace oil monitors and leak detectors.
All Turner Designs instruments are manufactured under ISO 9001:2000 certification.
Turner Designs’ continuous on-line oil in water monitors are:
- California EPA certified
- USCG certified
- IMO certified
TD-500D portable oil in water meter
The TD-500D is a fluorometer designed for quick, easy and accurate measurements of lube, hydraulic and fuel oil in water. When properly calibrated with a correlation method or a known standard, the TD-500D can be used to determine concentrations of unknown samples. It features:
- Oil and grease analysis in less than four minutes
- Compatible with all popular extraction solvents
- No solvent evaporation
- Easy calibration with oil standards or correlation to other methods
- Minimum detection limit less than 1ppm for most oils
- Range 0ppm to more than 1,000ppm
- Portable, hand held, less than 1lb
- Measures WSOs at pH less than two
- No interference from methanol
- Accurate and highly repeatable
- Correlates to standard laboratory gravimetric and IR methods
- CheckPOINT solid calibration check standard
- UV fluorescence technology
TD-107 for bilge water monitoring
The new TD-107™ uses our signature fluorescence measurement technology in a unique new package that can be universally applied to bilge water monitoring. Priced within range of standard light scatter type instruments, the TD-107 is low maintenance, rugged, and has all the features defined by marine customers and regulators including cell condition compensation up to 50% reduction in light transmission, at least 18 month internal permanent memory with data transfer via USB memory stick, 4mA-20mA output, and alarm relays.
Memory includes all events and a complete ppm vs time record. It is designed to interface directly with existing mounting for easy replacement of obsolete OCM technology. Turner Designs Hydrocarbon Instruments has teamed with NAG Marine of Norfolk, Virginia for exclusive worldwide sales and service for all bilge alarm applications.
TD-4100XDC oil content monitor
The TD-4100XDC is a rugged, simple and easy-to-use, low maintenance, continuous on-line oil content monitor for environmental contaminants like turbine lube oil, and benzene in storm drains, in take water, heat exchanger leaks in cooling water or steam condensate. The TD-4100XDC is a very simple self-contained skid mounted oil in water monitor ready to install on skid packages or directly in facilities. No special pumps or mixers are required. Explosion proof options for North American and European standards as well as heaters and coolers allow it to be used in virtually any industrial facility.
UV flouresence oil in water alanyzers
Turner Designs Hydrocarbon Instruments’ products use the principle of UV fluorescence with high correlation to standard laboratory oil in water analysis methods. These rugged instruments are used in all industries offshore and onshore, from water purification to metal forming to upstream and downstream oil industry applications. We provide worldwide field service for commissioning and training. For more technology information regarding oil measurement with UV fluorescence, please visit our web site listed below.
